In this article, we will guide you on how to enter fastboot Mode on Ulefone Armor 2. If you want to install any tweak, custom ROM, flash a new custom recovery, then it is very necessary to know how to enter fastboot mode in your Ulefone Armor 2.
While talking about the specifications, Ulefone Armor 2 features 5.0” (12.7 cm) display and also has a full HD screen resolution of 1080×1920 pixels. This phone runs on Android v7.0 (Nougat) operating system. Ulefone Armor 2 is powered by Octa-core processor and is paired with 6 GB RAM. The phone has a fingerprint sensor. Ulefone Armor 2 has the option to expand the memory by 256 GB. Ulefone Armor 2 is 14.5 mm slim and weighs 270 grams.
What is Fastboot Mode?
The Bootloader mode or the Fastboot mode is useful for various reasons. The very common use of the fastboot mode is flashing the stock firmware or the Stock ROMs, flashing custom recoveries like CWM, TRWP, unlocking the bootloader, restoring backups, removing bloatware, installing OTA updates, tweaking system, overclocking Android phones amongst the users.
How to Enter Fastboot Mode on Ulefone Armor 2?
- At the beginning, switch off the mobile by holding the Power key for sometime
- Now press and hold volume up and Power buttons for a few minutes
- Now let go all the buttons when the boot mode appears
- Select ”Fastboot” in this mode by using Volume Up to scroll down and Volume Down to confirm the same
- You are done! You will be in Fastboot Mode on Ulefone Armor 2.
How to Exit Fastboot Mode on Ulefone Armor 2?
- When you are in the fastboot mode, press and hold the power button for sometime
- Now hold until you see the phone reboot
- When you see the Ulefone logo release the button and you are done
I hope the above guide was helpful in knowing how to enter the fastboot mode on Ulefone Armor 2. If you have any doubts with any of the steps, do let us know in the below comment section and we are happy to help you out by providing the best assistance.
